Sunday, 5 November 2017

Do You Keep A Combat Casualty Kit In Your Go Bag?

I was introduced to combat casualty kits, as a young boy scout, while working on my first aid merit badge. At the time, one of the requirements for the merit badge was to assemble my own first aid/ casualty kit. My counselor, for the badge, was an active Emergency Medical Technician (EMT.) His passion for his job, and eagerness to share his knowledge, was quite evident throughout the whole process. Not only did I learn about which key items needed to be included in my kit… But, I also received extensive training on how to use each piece of equipment.

Combat Casualty Kit In Your Go Bag

Years later, I became a United States Marine. As I went through the School of Infantry and other “grunt” related courses; I began to learn about other components that I should include in my kit. The difference now, was that many of these components were related to combat injuries and wounds. Remembering my experience as a young boy scout, I realized that I didn’t just need to “collect” these items, but I also needed to learn how to use them. Luckily, like most infantry units, we had an excellent Corpsman that taught me much of what I know today.

Once I finished my active duty tour and became a civilian, I stored my combat casualty kits and relied mostly of standard first aid kits. I was busy working full time as well as maintaining a packed schedule of college courses. Even though my passion was spending days in the field, I had very little time to devote to it. I would take a hike now and then, but mainly for the benefit of my dogs. For me, there was always extra hours at work and the next paper to write for school… My leisure time was certainly – at a minimal.

Once I was done with my college commitment, I was able to adjust my work schedule which allowed me to send much more time on the trail, enjoying nature.

It felt as if I were picking up right where I left off!

Since I had always devoted a vast amount of time to addressing my preparedness, I knew that it was time to take inventory of all my gear. It had been a few years since I looked at the contents of all my go bags, especially my primary rucksack. As I went through the process, I was surprised to find how many of my items had expired. There was certain foods, water filters and even components of my first aid kits, that needed to be replaced. As I delved deeper into my first aid kits, I realized that they were nowhere near complete. These basic, chain store bought kits, lacked much of what is needed for preparedness in today’s world.

I happen to travel, quite a bit to teach my NTC Method, both in the States, as well as Internationally. One thing that adds a great deal to my comfort and preparedness is my Airport Go Bag. I include as many items as possible that will help me bode much better in a SHTF scenario. There are a few items that I consider must haves when I am away from my home base. I have items that will help me in a self defense situation. I have other items that will protect me during an active shooter situation. In addition, and some would say most importantly… I have gear that will allow me to act as a first responder if things were to really go awry.

There was a time, not that long ago, that regular people, would look at the contents of my airport go bag and consider me a paranoid nut job. However, with all of the foreign and domestic terrorism occurring -on an almost continual basis… More people than ever are not only more accepting of my preparedness lifestyle, but they want in! They see the importance of addressing their emergency preparedness, or lack there of, for them and their families.

We may look upon this need to be proactive with disgust and shame, thinking… Is this what the world has come to?!

Ultimately, It certainly doesn’t make the task of being prepared, any less important.

I mentioned my Airport Go Bag a bit earlier. I want you to keep in mind that I put this kit together so that I can have it with me Anywhere! If it can pass inspection at various airports around the world, then I know that, I’m good to go, virtually anywhere. When it comes to adding gear to my travel kit, I always have to keep rules and regulations in mind. When it comes to my combat casualty kit, I’m limited as to the items that I can carry with me while I am Enroute.

Travel Rules seem to becomes more stringent with each passing day.

When the situation allows, I carry as much gear as I can. But when I am restricted by travel and/ or security checkpoints, my list is much more selective. I’d like to share a few of the crucial combat casualty items that I carry with me virtually anywhere in the world.

Here is a list of just a few of my Casualty/ First Aid Kit:

1. (CAT) Combat Application Tourniquet:

While going through my First Aid merit badge requirements, I was taught to use a tourniquet ONLY as a Last Resort. The time of the tourniquet application needed to be written on the patient; Preferably written on the patient’s forehead, in blood if need be. This criteria was stated in our merit badge pamphlets. Keep in mind that this was decades ago and tourniquet applications have changed considerably. We were taught to make our own improvised or field expedient tourniquets. These are much more dangerous than today’s commercially made tourniquets.

Do You Keep A Combat Casualty Kit In Your Go Bag?

Combat Application Tourniquets or CAT’s are easily available and are lightweight. They are designed to be applied to a limb for hours, without causing irreversible damage. I keep two CAT’s with me in my go bag. Be sure to invest sufficient time in practicing with a CAT if you plan on carrying one or more. Proper application is crucial in order for it to work as intended.

2. Shemagh:

A shemagh may not be the first thing that comes to mind when it comes to providing first aid. But when it comes to versatility, in such a lightweight and inexpensive item, a shemagh is part of my kit. Keep in mind that the shemagh will have a plethora of applications, in addition to it’s first aid capabilities.

Do You Keep A Combat Casualty Kit In Your Go Bag?

A shemagh can easily be used for the following first aid applications:

  • Cravat
  • Sling
  • Bandage
  • Splint padding
  • Compress
  • Brace
  • Field Expedient Tourniquet
  • Elevate A Limb

There seems to always be a new use for a shemagh. Sometimes… all that it takes is for the need to arise.

3. Nitrile Gloves:

Being able to have any type of barrier between you, pathogens and other contaminants is something to consider when possible. Keeping a couple pairs of nitrile gloves, in my bag, is a must for me. They will help to protect me as well as the patient. Nitrile gloves are lightweight and inexpensive. I couldn’t think of any excuse to not have them in your go bag.

Do You Keep A Combat Casualty Kit In Your Go Bag?

4. Compression Bandage:

A compression bandage will aid in stopping blood flow caused by traumatic hemorrhaging wounds. It can also be used as a gauze dressing and to apply pressure to a wound. The compression bandage comes vacuum sealed which keeps it from occupying much space in your go bag. The fact that it comes in a sealed package allows it to remain sanitary when compared to other items in your pack.

Do You Keep A Combat Casualty Kit In Your Go Bag?

5. Particulate Respirator:

A single use particulate respirator is lightweight and inexpensive. However, the value that it adds to my effectiveness during an emergency, makes it a must in my casualty kit. The respirator can protect you from dust, fumes and other airborne pathogens. If you are exposed to toxic elements, and are unable to perform work, all of your skill sets and preparedness gear will be rendered useless. This would include your inability to provide first aid.

Do You Keep A Combat Casualty Kit In Your Go Bag?

The weather can also play a role in impeding your ability to respond in a crisis. It can range from a sand storm to wind kicking up debris from collapsed buildings… A particulate respirator will help you to operate while in these uncomfortable conditions.

6. First Aid Book/ Reference Cards:

I am always harping on training and how it is crucial when it comes to any aspect of preparedness. When the topic is first aid, training will be the difference between life and death. However, unless you are a trained medical professional, it will be nearly impossible to address all of the conditions that you may face in a crisis.  When we couple our lack of knowledge, with the panic experienced in a crisis, applying the correct sustained treatment can be nearly impossible.

Do You Keep A Combat Casualty Kit In Your Go Bag?

We will not be thinking clearly and the professionals may be hours or even days away. Having access to a good first aid reference book or cards, can go a long way in getting you back on track and restoring focus. Sometimes, all that you need is a quick reminder to bring back the skills that you learned in training.

Keep in mind that it may be you that requires the medical attention. If the other members of your family are less skilled than you, then they will need all the help that they can get. This time… It’s your life that depends on it.

Do You Keep A Combat Casualty Kit In Your Go Bag?

Bottom Line:

The fact that we need to focus on combat casualty kits, as civilians, is something that will never sit well with me. However, I’m aware that I would not be doing myself, nor my family, any good if I were to just pretend that the circumstances were different. All it takes is a few minutes spent watching any news channel or even just a glance at your Facebook Wall… And the facts are clearly confirming that we need to prepare; Probably now more so than ever before.

Up Next: The Secret Airplane Features That Flight Attendants Won’t Tell You About

Check out Do You Keep A Combat Casualty Kit In Your Go Bag? at https://survivallife.com/combat-casualty-kit/

Follow us on Facebook, Instagram, Twitter, Tumblr, and Pinterest! 



from SurvivalLife https://survivallife.com/combat-casualty-kit/

Saturday, 4 November 2017

Beat Cabin Fever In 7 Smart Ways

Cabin fever is an unavoidable situation we experience when confined indoors for a long period, especially during winter or during hunting and fishing off-season. Before you settle on your bed or couch to sleep, you might want to check out some of these ways to beat cabin fever.

Overcoming Cabin Fever With These Indoor Activities

Cabin fever, also known as winter blues, can affect your health physically and mentally. Being forced to stay indoors without a ray of sunshine will probably drive the sanity out of you. Although it affects each person differently, it can occur as fast as two days or as long as 7 days. Here are some ideas for you to beat cabin fever:

 

1. Read A Good Book

Read A Good Book | Beat Cabin Fever In Smart Ways
The most obvious and easiest way to break your boredom is to read. Either read an old favorite or hoard from the nearest bookstore from your place. You might also have that one book you’ve been meaning to read but don’t have the time to do so. This is the perfect time to open and read the dust-collecting book! Find a cozy spot where you can comfortably enjoy your book.

 

2. Invest On A New Hobby

Invest On A New Hobby | Beat Cabin Fever In Smart Ways
This is the best time to finally start a new hobby you’ve always wanted to try. Just be sure to purchase your supplies before getting stuck. Some hobbies you could try indoors include cooking, whittling, woodcrafting, or starting your very own indoor garden.

 

3. Board Games

Board Games | Beat Cabin Fever In Smart Ways
Playing board games is much more fun and exciting rather than playing on your mobile phones. It’s a very nice way to bond with your family and friends. Invest on a good board game like chess, monopoly, or scrabble. One thing I like about playing board games is it develops your critical thinking while being entertained.

 

4. Try A New Recipe

Try A New Recipe | Beat Cabin Fever In Smart Ways
When you love cooking, staying at home is the perfect way to hone your skills. Everyone loves a good home-cooked meal. Impress your friends and family with the new recipe you’ve learned instead of your signature dish you’ve been preparing for them most of the time!

 

5. Home Projects

Home Projects | Beat Cabin Fever In Smart Ways
Another way to beat cabin fever is to do some cleaning and rearranging. If you’ve got nothing better to do and your survival gear or fishing equipment needs a little dusting off, get on your feet and start the cleaning! Perhaps your garage needs organizing as well, there are a lot of DIY projects you can easily do to help you beat cabin fever. This is also a great way to break a sweat and keep the happy hormones coming.

 

6. TV Series or Movie Marathon

TV Series or Movie Marathon | Beat Cabin Fever In Smart Ways
Watching old classics or new movies with everyone is always a good idea. You can watch horror or thriller movies to keep the excitement going. Binge watching on the TV series you’ve failed to follow will also do. A good batch of homemade popcorn and hot chocolate will be the star of the night.

 

7. Plan Activities

Plan Activities | Beat Cabin Fever In Smart Ways
When stuck indoors, we always spend time daydreaming about outdoor activities. Turn those daydreams into a plan. Plan your family’s summer vacation — it’s the perfect time to synchronize your calendars and search for the perfect summer getaway.

 

Beat cabin fever during fishing off-season by watching this video from Mike Iaconelli Bass Fishing:

Being bored to death is not an exaggeration when stuck indoors during winter or hunting and fishing off-season. Cabin fever can be avoided — you just have to plan and be prepared. Search for activities such as these 7 ways listed above your friends and family can also enjoy.

What are the things you do to beat cabin fever? Share your Survival Life stories in the comments section below!

Up next: Bug Out Cabin Tips | How to Build the Ultimate Survival Shelter

Check out Beat Cabin Fever In 7 Smart Ways at https://survivallife.com/cabin-fever/

Follow us on Facebook, Instagram, Twitter, Pinterest, and Tumblr!



from SurvivalLife https://survivallife.com/cabin-fever/

Friday, 3 November 2017

Deadly airborne plague in Madagascar now at ‘crisis’ point

Over the last five days, cases have jumped by 37 percent fueled by a strain that is even more deadly than the Black Death which left 200 MILLION dead across the world. [...]

The post Deadly airborne plague in Madagascar now at ‘crisis’ point appeared first on Off Grid Survival - Wilderness & Urban Survival Skills.



from Off Grid Survival – Wilderness & Urban Survival Skills https://offgridsurvival.com/deadly-airborne-plague-madagascar-now-crisis-point/

Thursday, 2 November 2017

Properly Collecting Firewood For The Winter Months Ahead

Properly Collecting Firewood For The Winter Months Ahead

When forced into a survival scenario, there are many priorities to consider.  The four pillars of survival are food, water, fire, and shelter.  However, in many ways fire should be your primary focus.  In cold or wet conditions, you can die from exposure in as little as a few hours.  Fire is one of the fastest ways to get warm and prevent hypothermia.  In addition, fire allows you to purify water, cook food, light your camp, repel insects, and ward off predators.  Perhaps the most important benefit is that fire is a great way to boost morale.  After a long day of struggling through your survival efforts, staring into a warm fire can really help prepare you for the challenges of the day to come. This is why collecting firewood is so important.

Properly Collecting Firewood

However, getting a fire started is not always easy.  There have been times that despite my best efforts I was not able to get my firewood to light because of the moisture present.  During my first winter survival challenge I faced this scenario.  The temperatures during the day were around 20F with 20 mph winds, and I spend most of the day building a shelter.  It had snowed most of the day and had rained in the days before my challenge, so everything was damp. I collected firewood, and with about an hour of daylight left I started trying to light my tinder.  Attempt after attempt failed as I watched the sun go down.  It would be a long night.

Properly Collecting Firewood For The Winter Months Ahead

The temperatures dropped to -1F while the winds continued to pound my shelter.  I monitored my body temperature while I tried to keep my blood pumping with squats and jumping jacks.  The shelter was little help with these frigid temperatures.  At around 1am my body temperature dropped below 96F and I was forced to tap out as I entered the early stages of hypothermia.  After learning from my firewood-gathering mistakes, I repeated the challenge the following weekend with similar conditions.  Despite my fingers and toes still being numb from the prior attempt, I was successful this time.

Your first priority when gathering firewood should be tinder.  This is the fine material needed to take a spark or a flame.  Often dry materials like grasses, leaves, or pine needles can work for tinder.  However, with wet conditions you may need to get creative.  Cattail fluff works well as tinder and stays protected from moisture.  Birch bark has a chemical inside that is highly flammable and waterproof.  Pine cones may be wet on the outside but are often dry on the inside.  Pine resin is waterproof and highly flammable.  Any of these options can greatly help you get tinder started.  Your finished tinder bundle should be large enough that you can barely fit both hands around it.

Kindling consists of your small and medium sized sticks.  It is best that you collect dead branches that are still attached to trees and up off of the ground.  Anything on the ground will likely be saturated and will not light.  To ensure the kindling is completely dead and dry, try bending it and you should get a nice snap as it breaks.  To further eliminate moisture, you can use a knife or hatchet to strip the bark off of the sticks.  Your kindling bundle should be large enough that you can barely fit both arms around it.

Properly Collecting Firewood For The Winter Months Ahead

Fuel wood is your larger branches and logs.  Again, you want to find dead wood that is up off of the ground. Be sure that it is not starting to rot as this can make it much harder to get it to light.  Stripping the bark off of your fuel wood is also a good idea.  In addition, splitting your wood can help.  It exposes the dry inner wood to the flames which helps it light.  If you do not have a hatchet or ax, you can use a knife and baton your logs.  Simply stand up your log, place your knife blade on the end, and use a large stick to strike the blade and split the log.  If you want your fire to last all night, your stack of fuel wood should be about knee high.

After collecting your firewood, be sure to store it in a dry location in case it rains or snows.  Once your fire is going, you should also set pieces of fuel wood around the fire so that the heat starts to dry it before you need to place it in the fire.  Because of the importance of firewood, I often select my shelter location based on how much dead wood I see in the area.  Collecting firewood is hard work, and you want the process to be as efficient as possible. In addition, when in doubt I always prefer to collect more wood than I will need. I have heard on several occasions that you should take however much firewood you think you will need and then double it.  If you follow this advice, you should have a roaring fire that will easily last until dawn.

Up Next: Disaster Proof Survival Seeds And How To Store Them



from SurvivalLife https://survivallife.com/properly-collecting-firewood/

How To Revive Sealed Lead Acid Batteries

You might think these things are just pieces of junk in your garage, but you can turn things around if you could actually learn how to revive dead batteries. You can thank yourself later for not throwing away old hardware around the house that can prove useful with a little work.

Revive Dead Batteries | Restore Sealed Lead Acid Battery

The only reason you’re not using a dead car battery is due to its inability to provide the amperage to start a car. The truth is, they’re still useful for other pieces of equipment in your house like small low voltage devices. You could use it to power a small fan, a desk lamp, or even for emergency lighting. But first, you need to know how you can revive dead batteries. One of the most common batteries is VRLA (Valve Regulated Lead Acid Battery) and you’ll soon learn how to revive it as you read on.

 

What You Will Need:

  • Dry Cloth
  • Razor
  • Flat-Head Screwdriver
  • Water
  • Battery Charger
  • Meat Syringe (Optional)
  • Multimeter

Let’s Get To Work!

Step 1: Clean the Battery

Clean the Battery | Revive Dead Batteries| How To Revive Sealed Lead Acid Batteries
The first step in recovering a battery is to clean up the outer casing. Spray some biodiesel, olive oil, or kerosene, then wipe it with a dry cloth. You can skip the cleaning if you want, but it’s always good to start working without the mess.

Step 2: Remove the Top Cover

Remove the Top Cover | Revive Dead Batteries | How To Revive Sealed Lead Acid Batteries
Go around the edge of the top cover using a razor blade to the point of being able to detach it. You could also use the razor to lift the cover. Please be extra careful when holding the razor. As soon as you see a lift, slowly switch to a screwdriver. Gently raise the top by working the screwdriver under the case.

Step 3: Fill the Cells with Water

Fill the Cells with Water | Revive Dead Batteries | How To Revive Sealed Lead Acid Batteries
Take the caps off so you can fill each cell with water. You can use a meat syringe to fill a single cell with 20 to 30 milliliters of water. A dry battery usually takes one full syringe, but it’s okay to use any method you’re comfortable with as long as you completely fill each cell.

Step 4: Start Charging the Battery

Start Charging the Battery | Revive Dead Batteries | How To Revive Sealed Lead Acid Batteries
You can start charging the battery now. This demonstration makes use of Da Pimp charger, which is also a portable battery tester. Place the leads for the DC side correctly on the battery. It’s as easy as “black to black” and “red to red.”

Step 5: Leave the Battery Charged for 15 to 20 Minutes

Leave the Battery Charged for 15 to 20 Minutes | Revive Dead Batteries | How To Revive Sealed Lead Acid Batteries
You may see a really bad voltage reading before you start charging the battery. Let the charger work on the battery for 15 to 20 minutes then check the voltage reading again. If the reading shows pulsing signs, try to give it 15 minutes more until the voltage reading stabilizes.

Step 6: Check the Voltage Reading of Each Cell

Check the Voltage Reading of Each Cell | Revive Dead Batteries | How To Revive Sealed Lead Acid Batteries
Now, you can turn off the charger and check the voltage reading of each cell. At this point, you will know if any of the cells are dead or weaker than the others. With the use of a multimeter, set it to voltage DC with the positive probe on the positive terminal of the battery and dip the negative into the acid for each cell. You’ll get different readings, but it will let you know if any of the cells are dead.

That’s just about all needed to be done to revive a dead lead acid battery. Easy work for anyone!

 

Here’s the full video by The Good Life Lab on recovering an old sealed lead acid battery:

So there you have it! Reviving dead batteries is a handy skill to learn and it won’t take much of your time to recover an old lead acid battery. Finding a good use for things sitting at the corner of your garage is neat. You can use the battery as a power source for a lighting system in your house or some devices. You could also come up with your own brilliant idea of utilizing the battery if you want.

Have you tried to revive dead batteries? Share your experiences in the comments below!

UP NEXT: Bring Dead Ni-Cad Batteries Back To Life | Prepper Skills

Subscribe | | Revive Dead Batteries | How To Revive Sealed Lead Acid Batteries

 Follow us on Facebook, Instagram, Twitter, Tumblr, and Pinterest!



from SurvivalLife https://survivallife.com/how-revive-dead-batteries/

Wednesday, 1 November 2017

Deadly Parasols | Umbrella As A Self-Defense Weapon

Survival Gear Review: Fällkniven MB Modern Bowie

Fallkniven_MB_Modern_Bowie_Knife_Cobalt_posing

Trigger Alert: This article is about a very big knife. If that scares you, then click here.  March 6, 1836 was aFallkniven_MB_Modern_Bowie_Knife_Cobalt_posing-survival bad day for Jim Bowie. In fact the two weeks prior weren’t much better since the small mission building in which Jim and a hundred others took a stand was under attack.  Remember the Alamo? But long before that fateful Sunday morning James Bowie was famous for his knife prowess whether true or not. In 1827 Bowie (pronounced BOO-ee) was involved in a skirmish known as the Sandbar Fight where Jim Bowie essentially won a gunfight with a knife. A very large knife. And, as they say, the rest is history.

By Doc Montana, a Contributing Author to SHTFBlog and SurvivalCache.com 

Modern Sporting Knife

The Bowie Knife is a pattern much like the AR15 is a pattern. The so-called Bowie Knife is general form withfallkniven knife review some characteristics, but there is no one type of Bowie, nor any particular feature that makes or breaks a Bowie Knife. In general a Bowie Knife is a large blade, something eight or more inches, an overall length more than a foot, a crossguard separating the blade from the handle, and a clip point blade tip. Finally, there is the appearance of a false edge running along the top of the blade from tip through a curve ending at the spine proper. The false edge may or may not be sharpened, and thus the Bowie might cut both ways. Today, however, most Bowie Knives are not sharpened on the upper portion of the blade due to weapons laws in many jurisdictions. But originally as a fighting knife, that was the point.

Related: CRKT Redemption Knife 

The origin of the Bowie Knife is a little tangled in lore and opinions. Even the facts depend upon which story Fallkniven_MB_Modern_Bowie_Knife_Cobalt_Granfors_Bruks_hand_hatchetyou subscribe to. But in the end, and even with all the unknowns, the Bowie Knife is one of the most recognizable and famous blades in the world. And just as the initial Bowie Knives were evolving and upgrading as each one was pounded into existence on the blacksmith’s anvil, the Bowie is evolving even today some 187 years after James Bowie brought a wooden model of his ideal knife to an Arkansas blacksmith named, of all things, James Black who then pounded Bowie Knife life into an old file. So a blacksmith named Black made a Bowie for Bowie. Even more, David Bowie, the famous rock star, took his stage name “Bowie” from the knife because, as David noted in an interview, the Bowie Knife “Cuts both ways.”

Rambowies

In addition to the famous Rambo blades of Hollywood fame, the silhouette of the Bowie Knife can be found inBest Rambo Survival Knife real life in the popular Buck 119 hunting knife, the famous leather-handled USMC KA-BAR fighting knife, and in a smaller form factor, the SOG Seal Elite, Seal Pup and their multitude of versions. However, the rich history of Bowie Knives and its variants are pretty much still using historical designs and antique blade technology. Until now, that is. At the moment, the most modern, the most durable, and the sharpest Bowie Knife in the world is the Fällkniven MB or Modern Bowie.

Although Jim Bowie did not travel much beyond the southern territories of a fledgling United States, the Bowie Knife is a worldwide phenomenon and therefore fair game for all knife makers. But with that fame comes a majority of so-called “Bowies” that are more art than substance, or those versions that substitute size for quality. For Fällkniven to produce such a monster knife rich in American history and then to openly name it a Modern Bowie takes guts. And confidence. So I’m very happy to announce that the Fällkniven Modern Bowie truly honors Jim Bowie and adds yet more cutting magic and lore to the never ending supply of tall tales that Bowie Knives generate. I certainly intend to add my own Bowie adventures to the story line.

Also Read: Review of the SOG Pillar Knife

A Muscle Blade That Would Make Jim Proud

The MB version is not completely new for Fällkniven, but in fact building on both their large Northern LightsFallkniven_MB_Modern_Bowie_Knife_Cobalt_A2_compare series of knives crossed with their professional survival knives. An NL1 crossed with an A1 Pro to be more specific. And the result is bigger, thicker, and certainly badder. The Modern Bowie, abbreviated MB by Fällkniven, is a true Muscle Blade (abbreviated MB by me) . Borrowing heavily from the Survival Pro series, the MB including cobalt steel, a convex edge, a protruding tang, and a Thermorun handle. Even the presentation box and included DC4 diamond sharpener are straight out the Pro playbook. However, three notable deviations with the Modern Bowie include a larger, thicker handle, a double sided guard, and a mild index finger groove just aft of the stainless steel crossguard.

Dynamite in the Hand

The balance of the Fällkniven Modern Bowie is exceptional. The grip provides both the comfort and control necessary to wield such a large blade with elegance and precision. This is especially important since a key feature of the Bowie concept is a sharp and deadly point effective for stabbing and piercing. In reality the point of the clip point blade is to move the blade point lower and more line with the grip when thrusting the knife like a sword. Unfortunately the clipped nature (almost like a bite (clipped) was taken out of the spine of the blade) causes some limitations in daily work. Fällkniven preserved the spirit of the Bowie clip point but tempered it with the wisdom learned from the A1 Pro blade.

The original Bowie was from a time before multi-shot handguns existed. Once a holster full of bangs replacedThe Answer Water Bottle Filtration Solution 300x250 a sheath full of large fighting knife, the Bowie spirit moved on to embrace the rest of its original list of tasks. Those other chores, by the way, include work as an axe, a machete, a sword, a razor, and even a canoe paddle. Some add being a mirror to the list since a variant of Bowie Knives had a huge girth of shiny steel. But also notice on many of those deep shiny walls of metal in that they often have spine covering of a softer metal like copper, bronze, or aluminium. The metal blanket covering the back of the blade is not for trapping an opponent’s blade during a fight, but rather preventing one’s own blade from breaking during a strike due to brittle or poorly forged iron. The mirror polish on those knives is, at best, lipstick on a pig.

Related: The Mora Camp Axe

The brute thickness of the Fällkniven MB is a staggering 7.4mm or a few hundredths shy of a third of an inch! Survival SHTF Fallkniven Knife Bowie The blade length is a full 10 inches and the overall length of the Modern Bowie exceeds 15 inches. Fällkniven’s laminated cobalt steel uses an incredible edge steel sandwiched between durable and stain resistant stainless steel faces. Laminated steel can be much stronger than solid steel. Fällkniven also uses its famous convex edge profile adding further strength and sharpness to its world class supersteel composition. Add a beefy stainless steel crossguard that is effective without being a tripping hazard, a swollen Thermorun grip, and a full tang that is bigger than some knives and you have a Muscle Blade worthy of proudly wearing the name Bowie.

Bring It On

The Fällkniven Modern Bowie cuts with dangerous impunity whether a small task or massive challenge. WhileBest Fallkniven Survival Knife the Modern Bowie sadly lacks as a canoe paddle, it does chop wood like a beast, and behaves very well when batoning. You can shave arm hair with care, and clear brush with reckless abandon. You can lunge and slope and long point without embarrassment, but when the MB is sheathed on your belt you will be conspicuous.

The Modern Bowie is a vastly different experience than carrying the Fällkniven A2 Wilderness Knife. In factFallkniven_MB_Modern_Bowie_Knife_Cobalt_A2_grip_compare the MB is almost as large as the A2 is when inside its overbuilt leather sheath. And the MB is certainly longer. The A2 seems a perfectly reasonable camp knife when compared to the Modern Bowie, yet in proximity of popular knives the A2 is eye-openingly large on its own.

Pack’n

The sheath the Fällkniven Modern Bowie sleeps in is a four-layer double stitched leather dangler that wouldFallkniven_MB_Modern_Bowie_Knife_Cobalt_in_hand double as a canoe paddle. Perhaps that’s what Mr. Bowie wanted given that swinging a two pound sharpened steel blade back and forth in the water might be a dumb idea. The blade slides into the sheath in either edge direction, and the single leather snap strap is reversible by rotating it vertically. The stern end of the sheath has two grommet holes that are necessary for using a leg strap which is not a bad idea for field work since the Modern Bowie dangles just north of my knee. On the A2 sheath, there are also two grommet holes on each end of the insertion slot of the sheath. On the MB sheath, east and west of the insertion slot are removable screw bolts opening similar holes but without grommets presumably for some more creative mounting options.

The Third Century

Knives claiming to be Bowies range in price from $10 to $10,000 with the extremes for show only. To get a Bowie that actually performs like the Bowie you will need to spend something much closer to four figures than two.  The Fällkniven MB Modern Bowie is a brand new knife with deep and rich history. If you have a weakness or need for a Bowie-class knife, then the MB should be your starting point. And for everyone else, the Bowie Knife will be waiting right here for you just as it has for the past two centuries.

Visit Sponsors of SurvivalCache.com

 

Epic Water Filters



from SurvivalCache http://survivalcache.com/survival-gear-review-fallkniven-mb-modern-bowie/